Our range of Pressurised Pond Filters with built-in UV Clarifiers are designed to be continuously pressurised by your pond pump, maintaining excellent water quality for healthy fishkeeping.

Water can be fed directly from your pond pump through to the filter container and subsequently the outlet, continuously under pressure. The water outlet can be located higher than the actual filter body, making it easier to disguise around the pond - particularly useful if incorporating a waterfall!

Supplied with a fantastic new rotating cleaning handle on the head, maintaining the Pressurised Filter is now even easier! The unit will inform you when it is in need of a detailed clean using a small float, which pops-out of the head of the unit when required.

By simply turning the handle you can rinse clean the interior sponge, reducing the need to disassemble! Once rinsed, a separate outlet can be opened to discharge any dirty water until it runs clean and basic maintenance is complete.

Each unit is supplied with a built-in UV Light, which effectively prevents growth of algae and eliminates harmful micro-organisms and parasites which may cause fish diseases.

Specification

• Decorative Ponds: up to 50000 Litres
• Ponds with a small mix of fish: up to 35000 Litres
• Ponds with a small mix of koi: up to 28000 Litres
• Maximum Pump Flow rate: 13000L/h
• Power of UV-Clarifier: 55W
• Voltage: 220-240v
• Cable Length: 5m
• Dimensions: 600 x 600 x 815 (mm) (L x W x H)
• Filter Compartment Volume: 150 Litres
• 3 x stepped hosetails fits: 32, 38 & 50mm
• Free 24 Month Warranty
• AquaECO-12000 Pump
• Max flow rate - 12000L/H 
• Wattage: 100w
• Max head - 6.5m
• Cable Length: 10m
• FREE 24 Months Warranty

Filtration
Water passes through the PFC-50000 in the following order
1) Pond water flows into the PFC-50000 via your pond pump
2) Initial filtration begins by removing large particles through a mixture of coarse and fine filter foams (mechanical filtration)
3) Water passes through tumbling K2 media reduces harmful ammonia and nitrite from the water with the help of good bacteria (biological filtration)
4) Then the water passes across bio balls that harbour good bacteria across large surface area (biological filtration)
5) Lastly the exiting water is exposed to a 55w UV steriliser capable of reducing harmful bacteria and algae
6) Clean, clear and healthy water exits your PFC-50000 and returns to your pond.

Features

• Each unit is supplied with 7 filter foams

  4 x fine yellow
• 3 x course blue
• Includes bio balls and cage
• Includes K2 media -K2 media inside is approx. 4 Litres
• Pressurized Filter allows exiting water to run up-hill ‚Max 3m
• Biological and Mechanical Filter chambers for more efficient removal of dissolved and solid waste
• Simple Quick Handle Cleaning System for Easy Maintenance (no need to open and clean foams all the time)
• Enables Rapid Growth of Aerobic Bacteria resulting in removal of Lethal Ammonia and Nitrite
• Able to Cope with Higher Water Flows compared to Traditional Gravity Filters
• Complete with Inlet and Outlet Hose Adapters

AllPondSolutions AquaECO Pond Pump (AQUAECO-12000)

The new AquaECO series of pond pump's from AllPondSolutions with its brand new innovative electronics brings massive energy savings, low noise and long durability while maintaining high performance.
Compared to other pond pump brands the wattage use of the AquaECO range of pond pumps is extremely economical, saving you money in the long run.
Designed to circulate water to a pond filter or waterfall, the pumps cage is specially designed to prevent it clogging by providing the maximum surface area for drawing water in through the guard to the pump.
Included with the AquaECO pump is an additional inlet that allows you to attach hose to the inlet of the pump to provide water directly from a source such as a pond skimmer.

Pond hose and clips are supplied as follows;
PFC-50000 Complete Kit = 38mm pond hose x 10 metres + 38mm double wire clips x 5